Milling tonia hortensis linin.f extract as corrosion inhibitor for mild steel in aqueous medium

The inhibition efficiency of aqueous extract of milling tonia hortensis linin.F (MTHL) on the corrosion of mild steel in ground water was investigated by weight loss measurements and electrochemical studies. The corrosion rate of mild steel and the inhibition efficiencies of the extract were calculated. The results obtained showed that the extract could serve as an effective inhibitor for the corrosion of mild steel in aqueous media. Inhibition was found to increase with increasing concentration of the plant extract. The inhibitive action of plant extract is discussed on the basis of adsorption of stable complex at the mild steel surface. Theoretical fitting of different isotherms, Langmuir, Temkin, Freundlich and the thermodynamic model, were tested to clarify the nature of adsorption. Potentiodynamic Polarisation curves revealed that this inhibitor act as a mixed type inhibitor and the inhibition efficiency of up to 81% can be obtained

Author(s): J. Rosaline Vimala1, A. Leema Rose1 and S. Raja2

Abstract | PDF

Share This Article