14 / 56
Page 38
Nano Research & Applications
ISSN 2471-9838
E u r o S c i C o n C o n f e r e n c e o n
Nanotechnology &
Smart Materials
O c t o b e r 0 4 - 0 6 , 2 0 1 8
Am s t e r d a m , N e t h e r l a n d s
Nanotechnology & Smart Materials 2018
Introduction:
Key Enabling Technologies (KETs) provide the basis for innovation in a range of products across all industrial
sectors. However, one of the major weaknesses of Europe with regards to them lies in the difficulty of translating its knowledge
base into marketable goods and services. IZADI-NANO2INDUSTRY Project takes this challenge and, proposing different solutions
based on KETs such as nanotechnology, advanced materials and manufacturing, contributes to overcome the barriers that nano-
materials are facing to get introduced in the market.
Methods:
conventional materials and injection moulding, casting and coating manufacturing processes are improved by
nanotechnology and combined in three innovative PILOTS at different existing production plants:
TRIBONANO Pilot:
nanostructured powders for metallic cermet coatings and thermal spray technology for solid state deposition
HARDCAST Pilot:
nano-reinforcements added and dispersed via master-pellets in a new, low cost and safe gravity casting process
ESTCRATCH Pilot:
nanoreinforced thermoplastic based on masterbatches and inserts with nanotextured surfaces for injection
moulds.
Results:
new performance-enhanced components for the construction and agricultural machinery sector and the automotive one
are produced at industrial scale, reaching
TRIBONANO Pilot:
nanostructured coatings with improved ductility, toughness and sinterability, increased strength and resistance;
metallic parts (valve plate of hydraulic motor) with increased mechanical efficiency; subsequent reduction of fuel consumption
and CO2 emissions.
HARDCAST Pilot:
nano-added material with 30% increased tensile properties maintaining ductility in comparison with standard
ductile cast iron one; possibility for lightweight concepts and subsequent consumption/emission reduction; reduction of the
component (swash plate of hydraulic motor) production phases and of the related costs
ESTCRATCH Pilot:
PMMA with improved scratch resistance more than 140% compared to standard one, low colour variation of
the material; reduction of parts' (b-pillar) production phases and costs, greener manufacturing process, improved recyclability of
the parts.
Discussion:
Proposing technological solutions with minimum necessary changes to existing production lines and able to reduce
production phases and costs can improve the acceptance of KETs by the industrial sector, so overcoming that innovation gap
identified as the European 'Valley of Death'
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant
agreement No 686165
Nanotechnology based solutions for enhanced products and
processes in existing industrial manufacturing plants
Cristina Elizetxea
1
, Maider García de Cortázar
1
, Ane
Irazustabarrena
1
, Pedro Egizabal
1
, Maria Parco
1
, Isella Vicini
2
,
Elena Melotti
2
, Mario Ordóñez
3
, Alicia Johansson
4
, Riccardo
Borghini
5
, Angel Hernán
6
, Nagore García
7
1
TECNALIA, Spain
2
Warrant Group S.r.l. – Gruppo Tecnoinvestimenti, Italy
3
MAIER Technology Centre, Spain
4
NIL Technology ApS, Denmark
5
Bonfiglioli Riduttori, Italy
6
SISTEPLANT, Spain
7
SEMATEC, Spain
Cristina Elizetxea et al., Nano Res Appl Volume:4
DOI: 10.21767/2471-9838-C6-024