Polymer Sciences Open Access

  • ISSN: 2471-9935
  • Journal h-index: 9
  • Journal CiteScore: 3.80
  • Journal Impact Factor: 4.55
  • Average acceptance to publication time (5-7 days)
  • Average article processing time (30-45 days) Less than 5 volumes 30 days
    8 - 9 volumes 40 days
    10 and more volumes 45 days
Reach us +32 25889658

Preparation of polysaccharide hydrogels with different process methods

Annual Meeting on Biopolymers and Drug Delivery Systems
October 12-13, 2017 Osaka, Japan

Jihyun Yeo

Seoul National University, Republic of Korea

Posters & Accepted Abstracts: Polym Sci

Abstract:

Polysaccharides derived from natural resources are widely used to develop superabsorbent polymers. Previous studies were grafting petroleum-based synthetic polymers onto polysaccharides. But, these products have a disadvantage that complete biodegradation is impossible. In this study, modified starch and CMC were used as main materials, and chemical bonding of two polysaccharides was tried by esterification. Starch modification and hydrogel preparation were conducted as follows. First, the oxidation of starch was carried out in order to improve the functionality of compound. The hydroxyl groups, primarily at C-2, C-3, and C-6 positions, were transformed to aldehyde and carboxylic acid by oxidation. And then, the polysaccharide hydrogels were prepared by esterification between hydroxyl groups of CMC (or CMC-g-itaconic acid) and aldehyde group of modified starch. The final product was prepared in the form of powder or film, and various characteristics were analyzed. FT-IR spectrometer was used to confirm the chemical structure of products. The FT-IR spectra of starch aldehydes showed the characteristic IR bands at ~1735 cm-1, which confirm the oxidation of starch. In FT-IR analysis of hydrogels, the peaks related to ester bonding were observed. When hydrogel was prepared in powder form, it was confirmed that all samples showed two peaks at 1750 cm-1 and 1660 cm-1. In film form, two peaks were observed at 1710 cm-1 and 1610 cm-1 in all samples using CMC-g-itaconic acid. The maximum swelling ratio of hydrogel was about 25.

Biography :

Jihyun Yeo has completed her bachelor at the age of 22 years from Kyung Hee University and is taking a master's degree at Department of biosystems and biomaterials science and engineering, Seoul National University.
Email:jamong0109@snu.ac.kr